|
Product Details:
|
| Material: | Cross Linked Polyolefin | Insulator Type: | Heat Shrink Cable End Caps |
|---|---|---|---|
| Mix Order: | Yes | Origin: | CN(Origin) |
| Custom Pack: | Can Do | Lead Time: | 3-7Days |
| Support: | Dropshipping | Environmental Standards: | RoHS |
| Highlight: | RoHS Cable End Caps,Flame retardant Cable End Caps,Anti UV Cable End Caps |
||
Anti-UV RoHS Insulated Heat Shrinkable Cable End Caps Flame-retardant
Heat shrink cable end caps manufactured from polyolefin,applied as insulation of power and telecommunication cable ends.
• Manufactured from cross-linked polyolefin
• Used to seal cable ends during installation or storage, protecting cable ends against oxidation,ozone,UV,etc
• Coated with hot-melt adhesive to ensure reliable seal of cable ends
• Flame-retardant end caps are available upon customer request ,Available with valve if required
• Shrink temperature: start at 90°C, and fully recovered at 130°C.
Used to seal cable ends during installation or storage, protecting cable ends against oxidation,ozone,UV,et
| Property | Test Method | Standard Value |
| Tensile Strength | ASTM-D-638 | ≥12MPa |
| Elongation at Break | ASTM-D-638 | ≥300% |
| Tensile Strength after Aging | ASTM-D-638 | ≥10MPa(130℃,168 hrs) |
| Elongation at Break after Aging | ASTM-D-638 | 230%(130℃,168 hrs) |
| Dielectric Strength | IEC 60243 | ≥15 kV/mm |
| Volume Resistivity | IEC 60093 | ≥1×10^13Ω·cm |
| Longitudinal Shrinkage | ASTM-D-2671 | ≤10% |
| Water Absorption | S062 | ≤0.50 |
| Eccentricity | ASTM-D-2671 | ≤30% |
Select Table:
| Product No | Diameter/mm | Length(±5)/mm | Wall Thickness/mm | |
| As Supplied(Min) | After Recovered(Max) | After Recovered(±0.1) | ||
| WRSFM-12/5 | 12 | 5 | 45 | 2.5 |
| WRSFM-16/8.5 | 16 | 8.5 | 70 | 2.5 |
| WRSFM-20/8.5 | 20 | 8.5 | 72 | 2.5 |
| WRSFM-25/11 | 25 | 11 | 84 | 2.5 |
| WRSFM-30/16 | 30 | 16 | 94 | 3 |
| WRSFM-35/17 | 35 | 17 | 94 | 2.6 |
| WRSFM-40/15 | 40 | 15 | 94 | 2.6 |
| WRSFM-55/26 | 55 | 26 | 25 | 2.5 |
| WRSFM-74/31 | 74 | 31 | 145 | 3.2 |
| WRSFM-97/40 | 97 | 40 | 140 | 5 |
| WRSFM-120/57 | 120 | 57 | 150 | 4.4 |
| WRSFM-140/63 | 140 | 63 | 84 | 4 |
| WRSFM-200/95 | 200 | 95 | 270 | 4 |
| WRSFM-245/95 | 245 | 95 | 270 | 4 |
Remark:The end cap coated with hot-melt adhesive comes in two forms:flat adhesive and spiral adhesive.which can meet different customer needs.
Professional Production Quality is Reliable
Q1 . Which certifications or test reports do you have?
A : We have UL,ROHS and REACH.
Q2 . How to ship my order? Is it safe?
A : For small package, we will send it by Express,such as Fedex, UPS,TNT, DHL and so on.
For big packages, we will send them by Air or By sea or by Train. We will use good packing and ensure the safety. We will be responsible to any product damage caused on delivery.”
Q3 . What about your delivery time?
A : We have a lot of products in stock. We can send the stock products in 3 work days.
If without stock,or stock is not enough, we will check the delivery time with you.” (Usually is 3-7days).
Q4 . Can you provide samples? Are the samples free?
A : Yes. We can provide samples.
Usually for our standard products with stock, we can supply samples free for testing.
Q5 . Could I put my own logo on it?
A : Sure, of course, we are a professional manufacture and have over 10 years OEM experience.
Contact Person: Yao
Tel: 13182585575
